Barreto E37SGB Stump Grinder

The Barreto E37SGB track stump grinder is a recent addition to the Barreto tree service equipment line. Designed on the reliable track drive platform used by the Barreto 30SG commercial stump grinder, the 37SGB features a hydraulically-driven cutter wheel fitted with sixteen 900-series Green Teeth. The 37SGB tree stump grinder is powered by a 37hp EFI Briggs & Stratton Vanguard V-Twin engine. The engine is coupled to a piston pump: the larger piston pump delivers fluid to a piston motor that drives the cutter wheel. The cylinders, lift, and swing are supplied with fluid from an auxiliary pump that is mounted to the main piston pump. The tracks are driven by independent hydrostatic pumps mounted on the rear of the engine for easy access and simple linkage control. Counterbalance valves on each track drive prevent the track motors from slipping while the cutter wheel is engaged in the cutting process, even while operating on a slope. The track drive increases maneuverability around the job site, allowing the job to get done with increased efficiency.

Maximum operational control is designed into the E37SGB 

The cutter wheel operation and articulating arm are operated by controls mounted on the console. The cutter wheel is activated by a switch on the control stick and has a secondary safety switch to prevent accidental engagement. Back and forth movement across the stump, as well as the depth of cut, are easily controlled by handles on the console, allowing for carefully controlled movement of the cutter wheel as it reduces the stump to chips.

Increase Performance and Reduce Maintenance Costs with the Barreto hydraulic stump grinder

The all-hydraulic drive to the cutter wheel eliminates costly belts. It also increases customer satisfaction by ensuring there is no loss of power because of a damaged belt or mechanical component. The track drive increases maneuverability around the job site, creating customer satisfaction by allowing them to get the job done with increased efficiency.

Engine:
30SGB: Briggs & Stratton Vanguard V-Twin 37hp

Dimensions:
Weight: 1,950 lb.
Height: 49.5″
Length (head to side): 79″
Length (head straight): 98″
Width: 35.5″

Wheel Specifications:
Cutting Wheel: 19.2″ diameter to tooth
Cutting Teeth: 0.750 thick, 16 green teeth
Cutting Depth: 12″
Cutting Height: 32″
Head Swing: 134″, 99.7″ arc

Tracking System:
Track Width: 180MM (7.1″)
Total Ground Contact: 472 sq. in.